Guide
Start with LM Studio if you have an Apple silicon Mac and want a desktop app with MLX support, an agent and offline voice transcription. Start with Ollama if you have an Intel Mac, want MIT-licensed open source, or plan to use a command line, local API or coding agent. Running models locally is free in both.
You have read that a Mac can run AI models without sending anything to a server, and you want to try it. You open two tabs. Ollama and LM Studio are both free to download, both run open models locally, both now sell cloud plans, and both pages assume you already know what GGUF, MLX or a local API means.
So you stall. Pick the wrong one and you might spend an evening downloading a large model file into an app you end up deleting. Pick neither and the whole idea sits in a browser tab for another month.
This guide covers how the two differ on a Mac, a few decisions you can make on paper before installing anything, and how to tell after a week whether your pick was right. Disclosure: Dayflow is our product, and its Local AI mode works with either runner. The comparison is based on each vendor’s own documentation and pricing pages as checked on October 4, 2026. Nothing below comes from hands-on benchmarks.
OLLAMA_NO_CLOUD=1, and LM Studio’s cloud inference is an optional paid-plan feature.Mostly because the two tools overlap more than they differ. Both run open models on your own hardware. Both have a desktop app. Both added cloud options on top. When two products cover the same ground, the differences that matter end up buried in system requirements and license pages that nobody reads first.
The vocabulary does not help. GGUF, MLX, llama.cpp, Metal, inference, quantization: many people find they need a glossary before they can even compare two download pages. That makes the decision feel more technical than it is. For a first install, the questions that matter are plain ones. What Mac do you have? Do you prefer clicking or typing? How strict do you want to be about data leaving your machine?
Both products are also moving. LM Studio’s home page now leads with its Bionic agent and its pricing page is branded “LM Studio Bionic,” while the download page still offers “LM Studio.” Ollama’s free plan now includes starter cloud credits alongside local use. Advice you find on forums often describes an older version of either tool.
Finally, the real cost is not money. It is an evening and some disk space. That is low enough to try, but high enough that people put it off. The table below is meant to shrink the decision to a few lines.
| Ollama | LM Studio | |
|---|---|---|
| Mac support | macOS Sonoma (14) or newer. Apple M series gets CPU and GPU support, Intel Macs are CPU only | Apple silicon only, macOS 14.0 or newer. Intel Macs not supported |
| Other platforms | Windows, Linux, Docker | Windows (x64 and ARM), Linux (x64 and ARM64) |
| How you use it | CLI, desktop app, local API, Python and JavaScript libraries | Desktop app with the Bionic agent; headless daemon (llmster) for servers |
| Mac acceleration and formats | GPU acceleration on Apple devices via Metal | llama.cpp (GGUF) and Apple’s MLX on Apple silicon |
| License | Open source, MIT | Proprietary; free for both home and work use |
| Memory guidance on Mac | Docs state no RAM minimum | 16GB+ RAM recommended; 8GB may work with smaller models |
| Free plan | Run models locally, plus starter cloud credits and starter cloud models | Local LLMs via llama.cpp and MLX, Bionic agent, offline voice transcription, LM Link for up to 5 devices, limited web search |
| Paid plans | Pro $20 a month or $200 a year billed annually; Max $100 a month; Team $500 a month (early access); Enterprise custom | Bionic+ $20 USD a month; Pro $100 USD a month |
| Trial | None stated; see the vendor’s pricing page | None stated; see the vendor’s pricing page |
Ollama’s paid plans are metered in cloud usage credits: Pro lists $60 of credits a month, Max $300 and Team $1,000 shared. LM Studio’s paid tiers pay for cloud inference and web search. Neither vendor charges for running models on your own Mac.
What to do. Open the Apple menu, choose About This Mac, and write three things on a sticky note: the chip, the memory and the macOS version. This takes a minute and answers half the question.
If the chip says Intel, LM Studio is off the table, since its Mac version requires Apple silicon. Ollama still runs, but on the CPU only. If you are on Apple silicon, both are open to you. LM Studio recommends 16GB or more of RAM on a Mac and says 8GB machines may work with smaller models. Ollama no longer publishes memory guidance in its README or docs, so ignore the old “this much RAM for this size of model” tables still copied around the web and read the vendor docs for whichever model you pick. If your macOS version is older than 14, neither runner’s Mac requirements are met.
An illustration. A sticky note on the edge of a monitor reads “Apple silicon, 16GB, Sonoma.” That one line rules out nothing, so the decision moves on to how the person likes to work.
After a week. You should no longer be reading install guides or model pages that do not apply to your machine. If you still find yourself unsure what your Mac can handle, keep the note somewhere you see it.
What to do. On paper or an index card, write a single sentence: the task you want local AI for. Not “try local AI,” but something you would do this week. Summarizing notes, drafting replies, explaining code, or running underneath another app that needs a local model.
The job points toward a runner. If you want to plug a model into another app or a coding agent, check which runner that app supports and lean that way. Ollama describes itself as a way to use open models in desktop apps and coding agents or to build them into an application, and it offers a local API plus Python and JavaScript libraries. If the job is talking to a model in a window, or you want offline voice transcription included, LM Studio’s free plan puts those in one desktop app.
An illustration. An index card says “Turn my messy meeting notes into three bullets without them leaving my Mac.” That job needs a chat window and a privacy rule, not an API, so this person starts with whichever app feels more comfortable to click around in.
After a week. Look at the card. Did you do that job with the model on most workdays? If yes, the runner is fine. If the card went untouched, the problem was probably the job or the habit, and switching runners will not fix it.
What to do. Think about the last few tools you set up. Did you install them by dragging an app into Applications, or by pasting a command into Terminal? Go with whatever you already do without thinking.
This is not a skill test. Plenty of technical people prefer windows, and plenty of non-programmers are happy in a terminal once a command is written down for them. Ollama has a desktop app, but its CLI and local API are central to how the vendor describes it. LM Studio is built around its desktop app, with a headless daemon called llmster for people who later want to run it on a server.
An illustration. Someone who keeps a Terminal window open all day for other work installs Ollama and keeps a sticky note of the three commands they use most. Someone who has never opened Terminal installs LM Studio and stays inside the app.
After a week. Notice whether you opened the runner without friction or found reasons to avoid it. Avoiding it is useful information. If the interface is the thing in your way, that is the clearest signal to try the other one.
What to do. Write one sentence that states your privacy rule, then learn the one setting or habit in your runner that keeps you inside it.
Both tools mix local and cloud now, so “it runs locally” depends on how you use it. Ollama states, “Ollama runs locally. We don’t see your prompts or data when you run locally.” For its cloud-hosted models, the vendor says it processes prompts and responses to provide the service but does not store or log that content, and cloud features can be disabled entirely by setting OLLAMA_NO_CLOUD=1. On a Mac, Ollama stores models at ~/.ollama/models. LM Studio’s docs say it can operate entirely offline once model files are downloaded, and its paid plans add optional US-hosted cloud inference that the vendor describes as Zero Data Retention.
An illustration. A freelancer writes “Client documents never leave this Mac” on the card from earlier. With Ollama, they set the environment variable that turns off cloud features. With LM Studio, they stay on the free plan and use only downloaded models.
After a week. Try a no-software check: turn off Wi-Fi and run the job from your card. If it still works, you know that task is running locally. If you are unsure which of your sessions used a cloud model, your setup is too loose for the rule you wrote.
What to do. Before downloading anything, check how much free space you have, and start a short paper list of each model you download and why. Ollama’s documentation notes that models are tens to hundreds of GB in size, which adds up fast if you download a few to compare.
The list matters more than it sounds. Model names are long and similar, and a few days later it is hard to remember which one gave the good answer. Writing “downloaded for meeting notes, decent” next to a name saves you from keeping three you never open.
An illustration. A page in a notebook titled “Models” has two lines on it. One is crossed out with “too slow on this Mac, deleted.” The other says “keep, use for notes.” That is the whole system.
After a week. Your list should be short and every entry should have a reason. If you have models on disk that are not on the list, or entries with no note, delete and start the list again.
What to do. Pick one, use it for the job on your card every workday for a week, and jot a line each evening about what got in the way. A plain notebook works, or the daily work log template if you like a structure. Only then decide whether to try the other runner.
Switching early teaches you little, because the first days with any tool are mostly setup. A week gives you enough ordinary use to see which frustrations are about the runner and which are about the model or the task.
An illustration. By Friday, the notes in one person’s log say “setup confusing” on Monday and nothing after Tuesday. Another person’s notes say “answers are vague” every day. The first person’s runner is fine now. The second person’s problem is the model, and they try a different model in the same runner before trying a different runner.
After a week. Read your five lines. If most complaints are about installing, finding settings or the interface, try the other runner. If most are about the quality of the answers, keep the runner and change the model or the prompt.
The week-long try-out above depends on remembering what you did, and memory is unreliable by Friday. Did you use the model on Wednesday, or just mean to? A record you do not have to keep yourself removes that guesswork, which is the idea behind where did my day go.
Dayflow is a free, open-source Mac app that records the screen at one frame every 10 seconds and has AI write the day into a readable timeline. Full screen recordings and the local timeline are stored on your Mac. It is MIT licensed, runs on macOS 14 or later, and you can export a date range as Markdown from Settings.
It connects directly to this article in one way. Dayflow’s Local AI mode runs a supported model on your Mac through Ollama or LM Studio, so screenshot analysis stays on-device. Setup and local inference need your own hardware resources. You can instead use your own cloud provider, whose charges and terms apply, or the optional Dayflow Pro plan at $20 a month, which manages cloud analysis and, under the privacy policy, deletes screenshots after processing and may retain Activity Data for sync. The local and cloud processing page spells out each mode.
Dayflow publishes this article, so weigh this section with that in mind.
If you want to chat with a local model, write code with one, or build one into an app, Dayflow is not the tool. Ollama or LM Studio is. Dayflow uses one of them underneath for its Local AI mode; it does not replace them.
It is Mac only, so it will not help on a Windows or Linux machine where you might also run Ollama or LM Studio. It sees only what is on your screen. Work on your phone, on paper or in a conversation away from the desk does not appear in the timeline.
It is a record, not a coach or a blocker. It does not provide website blocking, invoices, payroll approvals or team reports. If you need those, our roundup of the best time tracker for Mac options covers tools built for them.
Its AI summaries can miss or misinterpret work, so check them before sharing. Running analysis locally also adds work for your Mac on top of whatever else the model runner is doing. And if you connect a cloud assistant to your Dayflow data, that conversation is not local just because the recordings are. Our page on whether Dayflow is safe goes through the details.
Start with your Mac, not with the models. On an Intel Mac, Ollama is the only one of the two that runs. On Apple silicon, both work, and the choice comes down to how you like to work: LM Studio if you want a desktop app with MLX support and extras in one window, Ollama if you want open source, a command line or an API to build on.
Running models locally costs nothing in either. Write down the one job you want done, decide how strict your privacy rule is, and give one runner a full week before you judge it. If your notes say the interface is the problem, switch. If they say the answers are the problem, change the model, not the runner.
It depends on how you like to work. LM Studio is a desktop app that runs models through llama.cpp and Apple's MLX on Apple silicon, so it suits people who prefer clicking to typing. Ollama has a desktop app too, but its CLI, local API and Python and JavaScript libraries make it the more natural pick if you are comfortable in Terminal or want to connect it to other software.
No. LM Studio's system requirements say the Mac version needs Apple silicon and macOS 14.0 or newer, and Intel Macs are not supported. If you have an Intel Mac, Ollama is the option of the two. It needs macOS Sonoma (14) or newer and runs on x86 Macs, but CPU only. Apple M series Macs get both CPU and GPU support.
Running models locally is free. The free plan also includes starter cloud usage credits and access to starter cloud models. Paid plans are for cloud usage: Pro is $20 a month or $200 a year billed annually, Max is $100 a month, Team is $500 a month in early access, and Enterprise is custom. Ollama's pricing page states no trial.
Yes. LM Studio announced on July 8, 2025 that it is free to use both at home and at work, with no form or separate commercial license needed. The paid tiers, Bionic+ at $20 USD a month and Pro at $100 USD a month, pay for cloud inference and web search rather than local models. The app is proprietary, not open source.
LM Studio recommends 16GB or more of RAM on a Mac and says 8GB machines may work with smaller models. Ollama's current documentation states no RAM minimum, and the memory tables still circulating online are not in its README anymore, so do not treat them as official. Check the vendor docs for the specific model you plan to download.
Not when you run models locally. Ollama states that it does not see your prompts or data when you run locally. Its optional cloud-hosted models are different: the vendor says it processes prompts and responses to provide that service but does not store or log the content. You can turn cloud features off entirely by setting OLLAMA_NO_CLOUD=1.
Ollama is open source under the MIT license, according to its main GitHub repository. LM Studio is a proprietary desktop app, and its terms prohibit modifying, redistributing or reverse engineering the software. If open source matters to you for auditing, packaging or principle, Ollama is the one of the two that meets that bar.
No, and it is not meant to. Dayflow records your screen and has AI write your day into a timeline. Its Local AI mode actually relies on Ollama or LM Studio to run a supported model on your Mac. If what you want is to chat with a local model, write code with one or build it into an app, Ollama or LM Studio is the right tool.
Yes. Dayflow's Local AI mode runs a supported model on your Mac through either Ollama or LM Studio, so screenshot analysis stays on-device. Setup and local inference use your own hardware resources. Dayflow is free and MIT licensed on macOS 14 or later, with an optional Pro plan at $20 a month that handles analysis in the cloud instead.
MLX is Apple's machine learning framework for Apple silicon. LM Studio supports MLX on Apple silicon Macs in addition to llama.cpp with GGUF model files. Ollama uses GPU acceleration on Apple devices through Metal. If a model you want is offered in MLX format, LM Studio is the runner of the two that lists MLX support.
Dayflow is $0 and open source. Full recordings stay on your Mac, with local AI available for on-device analysis.
Download for MacOS macOS 14+ · MIT licensed · no account required